nickel alloy steel monel 400

nickel alloy steel monel 400

  • Thickness: 1.2~200 mm
  • Width: 50~4020 mm
  • Length: 50~18000 mm
  • Steel Grade: A,B,D,E,A32,D32,E32,A36,D36,E36,A40,D40,E40
■ Full Data

Nickel Alloy 400, Monel® 400 - Continental Steel & Tube ...

Nickel Alloy 400, Monel® 400 Monel 400 is well known for its high strength and corrosion resistant properties. It works in a wide range of temperatures, and is available in …

Monel 400, Alloy 400, UNS N04400 - MEGA MEX

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working.

Monel - Wikipedia

Monel alloy 400 is a binary alloy of the same proportions of nickel and copper as is found naturally in the nickel ore from the Sudbury (Ontario) mines and is therefore considered a puritan alloy. [i] [3] [4] Monel was named after company president Ambrose Monell, and patented in 1906. [5]Properties· [PDF]

alloy 400 - Special Metals Company

MONEL ® alloy 400 specialmetals MONEL® nickel-copper alloy 400 (UNS N04400/ W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high

What Are the Properties and Composition of Monel 400?

Monel 400 is a nickel-copper alloy that is resistant to corrosion in many environments. It consists of two crystalline solids that, together, form a single new solid. Monel was the brainchild of Robert Crooks Stanley of the International Nickel Company. Patented in 1906, it was named for the ...

Monel 400 UNS N04400 - HPALLOY

Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good …

Monel 400 Alloy UNS N04400 | All Metals & Forge Group

General characteristics of Monel 400 Alloy. This is a nickel-copper, solid-solution alloy that is hardenable only by cold working. It has high strength and toughness over a wide temperature range and is resistant to many corrosive environments.

Nickel Alloys-Stainless Steels, Nickel Copper Alloys ...

These nickel copper alloys are sometimes referred to as MONEL or NICORROS and contain nickel with copper and small amounts of iron and manganese. A typical nickel copper alloy is the 400 …

Monel 400® | Monel 400 Tube | Monel 400 Tubing | Monel ...

Monel 400® is an alloy of nickel and copper, commonly used in critical, high-performance applications. It exhibits high strength, excellent resistance to acids …

Monel 400® Sheet & Monel 400® Plate - Magellan Metals

Monel 400® is a binary alloy of nickel and copper (with trace amounts of iron, manganese, carbon, and silicon). This alloy exhibits high strength, high resistance to acidic and alkaline environments, and good ductility and thermal conductivity.

Nickel 400 - Metal Alloys

Nickel 400 is a high-Nickel alloy consisting of at least 63% Nickel alloyed with Copper, some Iron, and other trace elements.

Nickel Alloy 405, Monel® R-405 - Continental Steel & Tube ...

Monel® R-405 is a nickel-copper alloy created and manufactured by Special Metals, also known as UNS N04405, it is part of the Monel family of superalloys. Typically found in rod, bar, and wire form, Monel 405 offers enhanced machinability due to a higher sulfur content.

Nickel Alloy 400 /Monel 400 (UNS N04400) - Aircraft …

Alloy 400 (UNS N04400) is a nickel-copper alloy with high strength (comparable to structural steel) and toughness. Alloy 400 also has excellent corrosion resistance in a range of media including seawater, hydrofluoric acid, sulphuric acid and alkalis.

History, Composition, and Applications of Monel Alloys

Monel, or nickel-copper, alloys were the forerunner of stainless steel. Learn about Monel's composition and many uses.

Alloy 400 Corrosion Resistant Nickel ... - Sandmeyer Steel

Alloy 400 (UNS N04400) is a nickel-copper alloy with excellent resistance to a wide range of corrosive environments. It is resistant to chloride stress corrosion cracking and has high strength and toughness over a wide range of temperatures.[PDF]

NiDI - Nickel Institute

NiDI Distributed by the Nickel Development Institute, courtesy of Inco Limited . Page 2 Nickel-clad steel jacketed reactor used for organic chlorinations. It was built in accordance with the A.P.I. A.S.M.E. code for unfired ... Corrosion of MONEL alloy 400 and Nickel in …

Nickel-Copper Alloy 400, Alloy 401, Alloy 404 Strip Coil

Nickel Strip Stainless Steel Strip Titanium Strip ... Nickel-Copper Alloy 400 exhibits excellent corrosion resistance to acids, alkalis and seawater, making it widely used in chemical processing. ... Monel 401 ®, Monel 404 ®, Nickel 400, Nickel 401, Nickel 404, Nickel Alloy 400, Nickel Alloy 401, Nickel Alloy 404 ...

Monel 400 Plate | Monel 400 Steel -Triton

Price of Monel 400 Plate. Nickel 200 Plate US $10-50 / Kilogram ( FOB Price) Monel Alloy 400 steel plate US $10-300 / Kilogram ( FOB Price) Monel Alloy K-500 US $20-40 / Kilogram ( FOB Price) Hastelloy X plate US $80-90 / Kilogram ( FOB Price)

Monel Alloy 400 pipes, tubes and more – easy order, quick ...

Monel® Alloy nickel-copper alloy 400 (UNS N04400; W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.

Monel 400, UNS NO4400 | MTSCO - MT stainless steel

Monel 400, UNS NO4400, China Supplier, Manufacturer and exporter of austenitic, nickel alloy material, duplex steel, stainless steel pipe, tube, tubing, seamless ...[PDF]

Guidelines for the welded fabrication of nickel alloys …

NiDI Nickel Development Institute Guidelines for the welded fabrication of nickel alloys for corrosion-resistant service A Nickel Development Institute



Inquiry >>
[email protected] 0086-21-61182423
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :